Sunday, 23 December 2018

The specialist servicing solar hot water system is now easy and affordable!

Solar hot water system requires regular maintenance, servicing and inspection to keep their operation smooth and efficient. You have to look over every component and may need to repair or replace time to time. Also, you have to take the necessary steps to resist scaling, freezing, corrosion. At this point, you need an expert hand for Specialist servicing the solar hot water system. Plumfast is helping you with the help of their experienced professionals and qualified technicians. We are offering cost-effective repairs and replacement. Once you choose us, we will do a regular inspection and take necessary steps, so that your hot water system run smoothly.

Our inspection list

We will regularly inspect the following section:-

We will do regular visually check for the shedding of your collectors on an annual basis because shedding has a great effect on the performance of solar collectors.

We are offering regular and periodic cleaning of collectors to remove dust and soil so that your system gives the highest performance.

In Specialist servicing solar hot water system, we look over the cracks and if found, fix it immediately of your collector glazing. We also check the storage tanks whether it gets any leak or damage or other sign of corrosion. If it finds, we fix it immediately.

Prevention of hot water system

We generally provide prevention in two major sections. One is scaling, and the other is corrosion. For scaling, we first check whether the domestic water is hard or soft. Because of the hard water cause buildup of calcium.  It deposits in the hydronic solar heating system. If your system uses hard water as heat transfer fluid, scaling might occur in the collector, distribution pipe and the heat exchanger. In Specialist servicing the solar hot water system, we are offering wrap around the external heat exchanger in an alternative way.

It has been seen that a well designed solar system always experience minimal corrosion. But if they do, it is galvanic corrosion. An electrolytic process occurs due to the two dissimilar metals coming into the contact of each other.  In that case, one metal becomes a positive electrical charge, and that pulls negative charges from the other. As a result, one of the metals gets corrodes. On the other hand, the oxygen that entered into an open loop solar system can cause rust on any steel components. Through our Specialist servicing solar hot water system we help to protect your system from getting damaged. Contact us.

No comments:

Post a Comment